<h2>STANDARD FEATURES</h2> <figure><img src="https://piranhafab.com/wp-content/uploads/p65-machine-numbered.jpg" alt="P-65 Ironworker Standard Features" width="600" height="581"></figure> <p>P-65 Model Pictured Here</p> <ol><li><strong>Urethane Stripper Attachment- </strong>keeps material flat through the punching process, eliminating<br>distortion. The shorter required stroke gives you a faster punching cycle.</li><li><strong>Automatic Urethane Hold-downs- </strong>clamps and releases material automatically with each stroke. Part movement is eliminated by clamping the part throughout the entire shearing cycle.</li><li><strong>3</strong>. <strong>Visibility- </strong>a direct line of sight over the hold down bar allows the operator to easily and accurately line up cuts to the shear blades.</li><li><strong>Flat Bar Shear- </strong>the low rake angle shear design results in flatter and higher quality sheared parts. Shear blades have four useable edges giving you a longer life and less expensive blades.</li><li><strong>Angle Shear- </strong>the floating upper blade seats in the center of the angle prior to cutting minimizing<br>distortion giving you a higher quality cut.</li><li><strong>Coper Notcher- </strong>the low rake angle keeps part flat and under control during notching.</li><li><strong>Quick Change Tooling– </strong>the unique Piranha dovetail design allows for quick installation and removal of all standard and optional tools.</li></ol>