The PMI-14 A 45 Degree Double-Blade Angular Sawing Machine is designed to cut non-ferrous
material quickly, accurately and with a burr free finish. This Machine has two saw blades that are
positioned at 45 degrees vertically to reduce waste. The PMI-14 A is ideal for manufacturers of
door and window frames because it can produce two opposing 45 degree cuts in a single cycle.
The double saw blade design greatly increases your production and efficiency.
Saw Blade Spindle:
The Saw Blades travel vertically through the work piece on two precision machined shafts to
assure consistent and accurate cutting. The PMI-14 A comes equipped with two saw blades that
are staggered at 45 degrees. Each saw blade is operated by its own 2 HP saw motor.
Saw Blade Feed:
The saw blade feed is controlled via a pneumatic cylinder with full control of the feed rate. This
allows for accurate cuts and long blade life. In addition, the saw blade travel is controlled for
fastest cycle time.
Cutting Angle 45 Degrees
Cutting Width 100mm (3.93”) / 90mm (3.54”)
Cutting Height 100mm (3.93”) / 140mm (5.51”)
Saw Blade Size 14 inch x 1” Bore (2)
Saw Blade Speed 3400 RPM
Saw Blade Motor 2 HP (Each Saw Blade)
Work Table Height 830mm (32.67”)
Machine Size 1370mm (53.93”) x 820mm (32.28”) x 1310mm (51.57”)
Machine Weight 682LBS