The PMI-LJK500 is designed for applications that require notch cuts. The LJK500 has two saw
heads that can be positioned from -45 degrees to +45 degrees and a saw table that can be position
from -45 degrees to +45 degrees so the machine can perform a wide range of special notch cuts
that require special angles. The angles are set automatically via a servo motor and key pad
control. The machine’s precision design ensures accurate notches.

Saw Head:
The machine is equipped with two saw blades that can be position from – 45 degrees to +45
degrees. The saw blades are positioned automatically with servo control. The operator enters the
required angle into the keypad control and the saw heads automatically position to the entered
angle. One blade is mounted vertically and one saw blade is mounted horizontally. The vertical
saw blade is a 24 inch diameter and the horizontal blade is a 20 inch diameter. Since the saw
blades can swing 45 degrees in both directions, the saw is capable of notching various angles.
Each saw head has its own 5 HP saw motor. The saw blade speed is 2,800 RPM. Below is a
drawing showing some examples of the notches the saw can produce.