PMI PMI-CNC S-TYPE 5-AXIS PROFILE MACHINING CENTER
Mill Drill Saw ComboThe PMI-CNC S-Type 5-Axis Profile Machining Center is built and designed to mill, drill, tap, and saw-cut aluminum and other non-ferrous materials. (copper, brass, plastics).
Machine Features:
Standard available X-axis working lengths from 137.76 to 295 Inches (3.5m to 7.5m)
Short scale multiple processing (2 Zone), Long scale processing, 5-axis processing
The traveling column features precision positioning accuracy
The traveling column is driven through servomotor combined with a gear/rack transmission
The Z and Y axis are driven through servomotor combined with ball screw
Each Axis moves on precision linear guide ways to allow for fast and smooth movements
Automatic tool changer - 12 tool capacity
The Machine is equipped with air clamps to hold material in position
Automatic Clamp Movement
The machine is equipped with a safety guard to ensure operator safety (Partial or Full cover
available)
Industrial PC based CNC Control is the standard equipment. It is easy to learn and operate.
The machine is equipped with an oil misting system. The oil mist system will extend tool life
and also ensures superior cutting quality.
Spindle air blast is standard on the machine
Equipped with an auto lubrication system for the linear guide ways and ball screws
Chip conveyor is standard on this machine
Travel
X-Axis Travel 137.76 Inches (3500mm) to 295 Inches (7500mm)
Y-Axis Travel (3-axis) 27.55 Inches (700mm)
Y-Axis Travel (4-xis) 15.74 Inches (400mm)
Y-Axis Travel (5-axis) 7.87 Inches (200mm)
Z-Axis Travel 14 Inches (350mm)
A-Axis Travel +/-120 degrees
C-Axis Travel +/- 220 degrees
Table
Table Working Type 4 to 10 Vises (with automatic movement)
Table Working Surface 27.55 inches x 137.76 inches to 295 inches (700mm x 3500mm
to 7500mm)
Max Holding Power (per vise) 242 lbs (110kg)
Spindle
Spindle Speed 20,000 RPM
Spindle Motor 10 HP (7.5 kw)
Spindle taper HSK63
Feed Rate
Rapid Traverse X: 196.8 FPM (60m/min)
Y: 78.72 FPM (24M/Min)
Z: 78.72 FPM (24 M/Min)
3-Axis Servomotors X-axis: 2Kw Y-Axis: 1Kw Z-Axis: 2Kw (Mitsubishi)
Positioning Accuracy (+/-) X-Axis: 0.002 Inches (0.05mm)
Y-Axis: 0.0008 Inches (0.02mm)
Z-Axis: 0.0008 Inches (0.02mm)
Cutting Feed Rate 0.0394 to 196.85 Inches/min (1 to 5000mm/min)
Tool Storage
Tool storing capacity 12 Tools
Tool Holder HSK 63
Magazine Type Automatic Disk Type
General
Machine weight 11,000lbs (3.5m) or 17,600lbs (7.5m)
Machine dimensions 268” x 99” x 108” (65800 x 2504 x 2742mm) 3.5m or 374” x 99”
x 108” (9500 x 2504 x 2742mm) 7.5m