Most Economical Bowl Machine on the
Market. 110 Volt on off Switch, Built
in Parts Unload System, Solution
Pump and Tank available.
T Y P I C A L BOW L A P P L I C A T I O N S :
Deburring fabricated aluminum or
Deburring of bronze water meter
Deburring aluminum die cast heat
Improve surface finish on titanium ball
Deburring pinion gears and spline
Pre-anodize finish on extruded aluminum parts
CARTRIDGE DRIVE SYSTEM consists of precision grease type roller bearings mounted to the vertical driveshaft. The vibrator components are protected inside the heavy steel cartridge housing which
is easily accessed to keep downtime at a minimum.
HEAVY DUTY BOWL is of all w elded steel construction reinforced by gusset plates. The tub is
stress relieved then shotpeened for maximum durability insuring years of trouble free use.
ADJUSTABLE AMPLITUDE the factory setting
rarely needs adjustment however vibrating action
can be changed by adding or subtracting counterweight on the drive shaft.
QUIET OPERATION is attributed to the precision
drive system. Noise levels as low as 85 dBA.
RUGGED POLYURETHANE BOWL LINING is cast
up to 3/4 “ thick. The polyurethane lining is abrasion resistant to withstand heavy loads providing
many years of use. A removable urethane drain
plug is included and is easily cleaned out periodically. Ribbed sidewalls minimizes flat parts from sticking to sidewalls.
SINGLE PHASE OPERATION On-off switch with 6
ft. long cord and plug is provided for connection to
110 volt outlet. Switch includes outlet for compound
pump to auto start/stop compound flow with machine.
STEEL CONSTRUCTION BASE: and the heavy
duty coil springs support the bowl. TEFC motor is
base mounted to reduce vibration. Steel footpads
for floor mounting are provided.
MEDIA DISCHARGE DOOR for change out of
|Chamber Size||3.5 ft³|
CUBIC FT. 3.3
“ A “ 33.5"
“ B “ 10.5"
“ C “ 11"
“ D “ 41"
" E " 36"
SHIP 850 LBS