The PMI-14 A 45 Degree Double-Blade Angular Sawing Machine is designed to cut non-ferrous material quickly, accurately and with a burr free finish. This Machine has two saw blades that are positioned at 45 degrees vertically to reduce waste. The PMI-14 A is ideal for manufacturers of door and window frames because it can produce two opposing 45 degree cuts in a single cycle. The double saw blade design greatly increases your production and efficiency. Saw Blade Spindle: The Saw Blades travel vertically through the work piece on two precision machined shafts to assure consistent and accurate cutting. The PMI-14 A comes equipped with two saw blades that are staggered at 45 degrees. Each saw blade is operated by its own 2 HP saw motor. Saw Blade Feed: The saw blade feed is controlled via a pneumatic cylinder with full control of the feed rate. This allows for accurate cuts and long blade life. In addition, the saw blade travel is controlled for fastest cycle time.
Technical Data: Cutting Angle 45 Degrees Cutting Width 100mm (3.93”) / 90mm (3.54”) Cutting Height 100mm (3.93”) / 140mm (5.51”) Saw Blade Size 14 inch x 1” Bore (2) Saw Blade Speed 3400 RPM Saw Blade Motor 2 HP (Each Saw Blade) Work Table Height 830mm (32.67”) Machine Size 1370mm (53.93”) x 820mm (32.28”) x 1310mm (51.57”) Machine Weight 682LBS