The PMI-14 B-Type is a 45 Degree Double-Blade Sawing Machine for making framing and notching cuts of non-ferrous material quickly, accurately and with a burr free finish. It has two saw blades that are positioned at 45 degrees vertically to reduce waste. The PMI-14 B is ideal for manufacturers of door and window frames because it produces two opposing 45 degree cuts in a single cycle. The double saw blade design greatly increases production and efficiency. Saw Blade Spindle: The Saw Blades travel vertically through the work piece on two precision machined shafts to assure consistent and accurate cutting. The PMI-14 B is equipped with two 18” saw blades that are staggered at 45 degrees. Each saw blade is operated by its own 2HP saw motor. Saw Blade Feed: The saw blade feed is controlled via a pneumatic cylinder with full control of the feed rate. This allows for accurate cuts and long blade life. In addition, the saw blade travel is controlled for fastest cycle time.
Technical Data: Cutting Angle 45 Degrees Max Cutting Width 130mm (5.12”) Max cutting Height 180mm (7.09”) Saw Blade Size 18 inch x 1” Bore (2) Saw Blade Speed 3000 RPM Saw Blade Motor 3 HP (Each Saw Blade) Work Table Height 830mm (32.67”) Machine Size 1400mm (55”) x 1000mm (39”) x 1400mm (55”) Machine Weight 750LBS 2 Saw Blades Included Tool Box Included